Sistema MicroChem^®

The MicroChem® water analysis system can be used as an analyzer, controller, or both, so you only need a single instrument regardless of individual needs.  Configure your MicroChem^® system as an analyzer/transmitter or controller, measure up to three of the following parameters: pH, ORP, chlorine, chlorine dioxide, conductivity, and 4-20 mA.  The MicroChem^® water analysis system is available packaged as a complete residual analyzer or as individual components, allowing flexible configurations to meet specific customer needs.

Why MicroChem® Systems?

• Measure up to 3 parameters: chlorine, pH, ORP, chlorine dioxide, conductivity, or 4-20 mA 
• Can be used as an analyzer, controller, or both at the same time
• Uses standard PID or compound PID control
• Two (2) outputs available from each channel card*
• Accurate and repeatable wet-end measurement options 
• USB connectivity for simple set up and flexibility to change setup parameters 
• Intuitive touch screen user interface 
• Easily manage and make data-driven operating decisions 
• Includes six different language options

*  Two outputs are available from each channel card. One control output is available both as a 4-20 mA control signal or a pulse width modulation output. A second software configurable 4-20 mA output signal is available on each configured channel.